PTFE Open Mesh Belt

PTFE Open Mesh Belt

PTFE Open Mesh Belt

PTFE Mesh Belt

We select fine glassfiber or Kevlar as basic weaving material, coated with excellent PTFE resin to make it into various PTFE open mesh conveyor belts

PTFE Mesh Belt Application:

textile, printing: printing drying, dyeing cloth drying, shrinking and drying fabrics, non-woven bake drying, drying room conveyor belt.

Screen printing: pine dryer, offset printing, UV curing machine, paper, oil drying, UV drying, plastic silk screen drying bake, drying room conveyor belt.

Other items: high-frequency drying, microwave drying, freezing and thawing of various types of food, baking, heat shrink packaging materials, general moisture dry goods, flux type fast drying ink drying room conduction band.

Where the required heat transfer romantic occasions and thermal processing conditions, are suitable for use Teflon mesh belt.

PTFE Mesh Belt Application:

textile, printing: printing drying, dyeing cloth drying, shrinking and drying fabrics, non-woven bake drying, drying room conveyor belt.

Screen printing: pine dryer, offset printing, UV curing machine, paper, oil drying, UV drying, plastic silk screen drying bake, drying room conveyor belt.

Other items: high-frequency drying, microwave drying, freezing and thawing of various types of food, baking, heat shrink packaging materials, general moisture dry goods, flux type fast drying ink drying room conduction band.

Where the required heat transfer romantic occasions and thermal processing conditions, are suitable for use Teflon mesh belt.


PTFE Mesh Belt

No.

Mesh Size

Material

Thickness

Weight

Temp Resistance

Max width

Tensile Strength

6001

1X1mm

Fiberglass

0.5mm

390g/m2

-70-260℃

4m

1600/1500N/5cm

6002

2X2mm

Fiberglass

0.7mm

450g/m2

-70-260℃

4m

2200/1500N/5cm

6003

4X4mm

Fiberglass

1.0mm

500g/m2

-70-260℃

4m

2100/1500N/5cm

6004

4X4mm

Fiberglass

1.0mm

480g/m2

-70-260℃

4m

2100/1500N/5cm

6007

4X4mm

Fiberglass+Kevlar

1.2mm

560g/m2

-70-260℃

4m

3300/2800N/5cm

6008

4X4mm

Fiberglass

1.0mm

570g/m2

-70-260℃

4m

2800/1580N/5cm

6010

4X4mm

Kevlar

1.0mm

460g/m2

-70-260℃

4m

3500/3300N/5cm

6012

4X4mm

Fiberglass

1.0mm

580g/m2

-70-260℃

4m

2800/1500N/5cm

6013

10X10mm

Fiberglass

1.0mm

450g/m2

-70-260℃

4m

1100/1000N/5cm

6014

0.5X1mm

Fiberglass

0.5mm

420g/m2

-70-260℃

4m

2200/1500N/5cm

6015

2X2.5mm

Fiberglass

0.9mm

470g/m2

-70-260℃

4m

2200/1500N/5cm


PTFE Open Mesh Belt

 

PTFE Mesh Belt Joint method

This is the most common way of belt joints that pivotal joints, the joint network is made of Kevlar-coated teflon emulsion, Teflon mesh belt process is basically the same.

Belt connector + Kevlar wire= connector

Material is stainless steel buckle clasp connector, first with Kevlar cloth belt edges, then add steel buckle.

Carabiner connector + Kevlar fabric= Connector

PTFE Mesh Belt Repair

1: If PTFE the mesh belt deviation phenomenon appears, then adjust the tension of the shaft end of the driven shaft should slowly adjust, remember to adjust quickly, resulting in network with edge scratch.

2: If PTFE the mesh belt with jitter phenomenon, check transport aircraft as well as the presence or absence of corrosion roller conveyor tunnel refused to transfer phenomenon, individually adjusted.

3: mesh belt chain drive chain if there jump and run instability, both ends of the drive shaft sprocket should check whether the synchronization client for excessive tooth wear.

Copyright © Hengshui Qualified Filter Screen Co., Ltd.,

Technical support:QiXing